Time for another intensifying coat on the body.
The last one seemed to streak a little.
The streaks seemed to originate at the edge of the cap. Perhaps I overlapped and built too much up when I did the front and then the side.
I sanded the streaks off with steel wool. Gave it another coat.
The coats don't seem to be leaving an even colour. The bottom half seems lighter than the top half - and there are some patches that are much lighter.
Looking at the photos of the body before sanding I don't see any obvious reason for that patch to be coming up lighter.
Also, another neck top coat done.
Not really seeing anything build up here yet. Still just looks like the bare wood.
Reply With Quote
