HB-4S with a few improvements. And a lot of chemical ebonising. A lot.

[moody]

What will the heat of the valves do to the paisely material on the amp chassis?

[Fnord]

What will the heat of the valves do to the paisely material on the amp chassis?

This one (in the attached photo) is five months old. I coat them with really thick poured epoxy and I've never noticed any heat damage. I've only made three amps with the paisley though, so they are still a bit of an experiment.

If you look at the thread for http://www.buildyourownguitar.com.au...ll=1#post63092 you may see a resemblance. This amp was built to match that guitar!