"Starcaster" Build

[gavinturner]

DB to the rescue! It's certainly a fiddly problem. I think you made the right decision.

cheers,
Gav.

[ihasmario]

Build is up and running again - the bridge fits now. It's a little too snug right now, so it's difficult to get the bridge low enough - needs to come down about a mm or two for the action to improve. The bridge is a couple of mm off the body.

The neck is set. The angle of the neck on the stock kit was a little off meaning the angle near the bridge was way too high., I corrected it with some masking tape (about 3 layers) underneath the neck.

Going to start working on the circuit now. Seems like it will be four push pull pots, one rotary switch and one kill switch.

Pics later tonight as I'm work posting right now