My first Pitbull JR-1DC

[gavinturner]

Hi Simon,

i would personally clamp the neck in place and measure from the nut to the middle of each bridge post, and compare this to the stewmac fret position calculator values. It should tell you if the position is correct. There woul have to be a major issue for me to go screwing with the neck in the pocket, especially since the pickguard can hide any small gap.

cheers,
Gav.

[Dajavoodoo]

Thanks for the advice guys. I didn't think it was an issue but thought I would ask about it before screwing the neck to the body. I will do those calculations just to be sure.