should be fine, might need to drill the 2 neck screw holes a bit deeper. Make sure you put the existing 2 screws in before you drill the other 2 as the neck may have shifted a bit
should be fine, might need to drill the 2 neck screw holes a bit deeper. Make sure you put the existing 2 screws in before you drill the other 2 as the neck may have shifted a bit
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Reply With Quote
