post a pic of the screws you have been supplied. My neck screw holes were recessed with black washers.
Edit I scrolled up and saw the pics, my screw heads are recessed further at least flush so I'd drill the recess a bit deeper
post a pic of the screws you have been supplied. My neck screw holes were recessed with black washers.
Edit I scrolled up and saw the pics, my screw heads are recessed further at least flush so I'd drill the recess a bit deeper
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Cheers. I thought so.Originally Posted by wokkaboy
Think I need to worry about the thread already cut into the neck? I've already had two screws thread in when I was aligning the bridge.
- Sam
IB-5 - was finished, considering re-finishing body
IB-6S - done.
JR-1M - dressing frets and electronics build
ST-1 - still wondering how to install a tremelo
Telebass - non-PBG from parts buiild - painting body
Reply With Quote
