Or... I use a conical dremel bit to sand/grind the opening to the size of the jack rim, then a cylindrical sanding bit to level the recess edges so that they're parallel to the hole.
Or... I use a conical dremel bit to sand/grind the opening to the size of the jack rim, then a cylindrical sanding bit to level the recess edges so that they're parallel to the hole.
- Sam
IB-5 - was finished, considering re-finishing body
IB-6S - done.
JR-1M - dressing frets and electronics build
ST-1 - still wondering how to install a tremelo
Telebass - non-PBG from parts buiild - painting body
Reply With Quote
