I've tested the resistance of LP pups Stan, from memory bridge was between 8-9k ohms and neck was about 7-8k ohms.
I'll try and remember to check next time I got the cover off one
I've tested the resistance of LP pups Stan, from memory bridge was between 8-9k ohms and neck was about 7-8k ohms.
I'll try and remember to check next time I got the cover off one
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
cheers Wokka, that seems pretty standard then.
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
yeah Overlord don't quote me that is going on memory. Pretty sure they are around that region so not overwound or superhot but enough grunt to sound pretty good for stockys
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
When I did the 4-wire mod and magnet upgrade (here) I measured a couple of sets of stock PBG humbuckers first to get a baseline. The Bridge pups were ~11.1K and the Necks were ~10.7K (ended up at 11.5K and 11.2K respectively after the magnet swap).
Scott.
Just looked at my pups, about the same as Weirdy's measurements, bridge was ~11.3k and neck was ~10.5k and they sound pretty grunty to me!
nice one Weirdy, I totally forgot the figures and they are quite a high resistance pup
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I love my stockie singles in my STA. Wouldn't even think about changing them.
Just wanting to mention. Daion Performers should be pretty decent guitars. I have a Daion Performer P Bass that I picked up for $80 and it plays very nicely.
Yeah, '80s Japanese Fender copies like Daions and (especially) Profiles were fantastic. '80s Profile Strats and Teles were better than Fenders guitars we could buy in Australia at the time at half the price.Originally Posted by moody
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
cheers Callum!
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
Posting Permissions
Reply With Quote