Nut sizes/cutting your nuts

[andrewdosborne]

DB's nuts are going to be top class, so it'd be worthwhile considering that. Alternatively - look at the StewMac / Realparts websites at the "Fender" style nuts - they should be oversized so you can sand them down. You'll need one with a flat bottom - the groove for the nut is flat - not radiussed like the neck. Be prepared for some mess and smell - working with bone is pretty feral.

Just to second that I've used my first DB bone nut on recent SG-1F and it is without doubt one of the best 'bang for your buck' upgrades you can do. My completed kit builds will all eventually receive the same. All new ones to have one.

[stan]

Just to second that I've used my first DB bone nut on recent SG-1F and it is without doubt one of the best 'bang for your buck' upgrades you can do. My completed kit builds will all eventually receive the same. All new ones to have one.

Absolutely - always go the DB bone nut upgrade