cool, yeah black pickguard on white paint will look very nice
cool, yeah black pickguard on white paint will look very nice
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
"As the plank I got wasn't perfectly straight, the bits didn't marry up exactly right. Instead of trying to sand it down level, I discovered a workshop over the road from mine with a thickness planer. Score! Planed down to 42mm and perfectly flat on both sides".
How lucky is that! I haven't been able to find anyone that will be able to plane my body down when I get it.
And this is looking really sweet. Love seeing a scratch build for sure!
Thanks Rob. I guess I should give them a plug. Wood N You in Coopers Plains (Brisbane Southside) have all the big woodworking tools available to hire by the minute. They've got pretty much everything, lathes, cncs, thicknessers etc. Planing the body cost me $10.
Not going to help you much though.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Great work Pabs, coming along nicely, black and white will look classic
Stan's LP Build for my Sister: http://www.buildyourownguitar.com.au...ead.php?t=3146
Benson Pickup Strat mod: http://www.buildyourownguitar.com.au...ead.php?t=5229
Epiphone LP headstock fix: http://www.buildyourownguitar.com.au...ead.php?t=3410
Martin Backpacker Repair: http://www.buildyourownguitar.com.au...?t=5038&page=3
'57 Harmony Jazz guitar project: http://www.buildyourownguitar.com.au...ead.php?t=2972
I'll find someone somewhere sooner or later. If I were going to make and sell guitars I'd get a planer.Originally Posted by pablopepper
Thanks Rob. I guess I should give them a plug. Wood N You in Coopers Plains (Brisbane Southside) have all the big woodworking tools available to hire by the minute. They've got pretty much everything, lathes, cncs, thicknessers etc. Planing the body cost me $10.
Not going to help you much though.
Very cool though that you have that nearby!
Just saw this thread now Pablo, don't know how I missed it.
That looks clean as, nice job. Easy when you have a good template hey.
And yeah, when you are boring out the cavities before routing you want to drill out as much waste as you can, I overlap each drill hole so you only really rout the sides and bottom of the cavity. Like you say, you know next time now.
I went to wood n you this morning to thickness a body, great place with well serviced machines. Thanks for the heads up.
How are you going to do the white paint job?
I knew you'd dig that place, Dan. Its like a cabinetmaker's wet dream. Lol. I reckon I'm gonna 2 pack it. Being pine, I'm not worried about resonance too much but I want it protected as much as possible.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Body work looks great Pabs. Nicely contoured and nice and smooth. This will look killer in white gloss with black PG. A great choice! Watching your scratchie progress with very keen interest dude!
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
Thanks Gav.
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
Pablo, this is coming along nicely. What router are you using on this project, I'm looking to pick one up soon for some scratchy goodness!
Current Projects
#Planning 5 String Bass
Posting Permissions
Reply With Quote