Mockingbird style- Kurt White

[KurtSlash123]

hahah ill wait for it bargey xD

[stan]

Bargey, you seriously have too much time on your hands...

[bargeloobs]

Bargey, you seriously have too much time on your hands...

Not really, I just use it wisely:-)

[KurtSlash123]

update:

put tgether a dry fit this morning to make sure of all parts. used to TOM bridge in the photos to make it look nice, apart from that i wont have any real use for it.






i did find that the neck didnt quite sit into the neck pocket properly and therefore left a small gap. im going to be plying around with the neck alot anyway because of the floyd rose going in, so this isnt a huge problem.



apart from that i found a screw decided to bgin splitting the wood near the puckup cavity, even after i had predrilled. nothing a bit of wood putty wont fix up



really hoping to have that floyd rose comes in soon. its holding up all my production and im bored on my weekend haha. cheers for all your input already lads

[pablopepper]

I wouldn't use putty to fill that hole, use toothpicks and glue. The putty will crumble when you try and put the screw back in.

[wokkaboy]

looking at the bridge pup location and where the bridge sits is pretty close so its going to be pretty tight to get the floyd rose and pivot posts in but should be able to do it. While you wait for the FR to roll up in the post you can do some work on the neck, shape the headstock and you can start painting it

[KurtSlash123]

Cheers for the tip pabs! Really glad you told me that!

Woks I'm actually in town looking for something to shape the headstock with. Thinking of just getting a cheap jigsaw. I want to paint the neck and body at the same time that way any slight discolouration caused by moisture in the air, etc. will be the same and it should look almost identical

[KurtSlash123]

Update:

The floyd rose finally came in the mail today along with some much anticipated short stack CDs and DVDs (super excited).
Good news is.. It looks like it's gunna fit. Bad news is.. It's gunna be tighter than a virgin with her legs seen shut. The neck at the end is 68mm and the bridge from outside string to outside string is 63mm. I have 2mm of room on either side. Do I get a new neck? Or do you guys think this will be okay? I'll post some pictures before either Tuesday or Wednesday. cheers lads.

[KurtSlash123]

Further update, I checked the measurements against the original bridge of the guitar and they are the same width. The floyd rose should fit perfectly fine one very happy Kurt at the moment! Now I need to look at getting it routed out, anyone near Brisbane way and can possibly help me?

[stan]

good news Kurt, glad it worked out