Ian's TLA-1 Build

[pablopepper]

Yep, I agree. First thing you should do is make sure your nut is not too high. Easy way to check is fret at the third fret and the string should sit just a smidge over the first fret.

[stan]

Yep, I agree. First thing you should do is make sure your nut is not too high. Easy way to check is fret at the third fret and the spring should sit just a smidge over the first fret.

I think you mean nut not but Pabs....

Is the intonation set properly? This can create tuning issues. I agree with Bargy, unless it's an obvious error, the nut is probably in the right spot