Ozzbike can you please post a photo of the neck heel/truss rod ? Mine still protudes over 10mm out, so sounds like thats not the correct position. I figured it protuded and the adjustment is put a screwdriver in the holes drilled in it
Ozzbike can you please post a photo of the neck heel/truss rod ? Mine still protudes over 10mm out, so sounds like thats not the correct position. I figured it protuded and the adjustment is put a screwdriver in the holes drilled in it
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote