Hi Gary,
Send Adam an email and he will most likely replace it. To tap it you would have to strip the shaft out and is not really worth it.
Loving how this build is going by the way particularly your headstock design.
Hi Gary,
Send Adam an email and he will most likely replace it. To tap it you would have to strip the shaft out and is not really worth it.
Loving how this build is going by the way particularly your headstock design.
Tony
If one of your stock tuners is malformed and unusable just send Adam an email and I'm sure he'll get you sorted out. Are all the others ok?
(edit: too late, Tony gets the assist)
Scott.
Yes all others are fine. I will shoot Adam an email.
Thanks for your help guys. Much appreciated.![]()
Have completed wiring and just set the neck in place. Coming along nicely.
Looking slick mate. Reminds me of Slash's new AFD guitar
Pro job man, reaaaal nice!! Just watch leaving that bridge sitting there like that, easy to forget about and next minute you stand the guitar up and it falls off kissing your beautiful finish as it moves south:P
This build looks awesome. I've said it before but love the headstock design, it really compliments the whole guitar. I'd be interested to see how the setting up goes. I've just finished same guitar kit but bridge has ended up quite high in comparison to the bridge pick-up (my amp will have to work just a bit harder!)
looks a million bucks Gaz well done mate. I normally put a scrap piece of wood where the clamps are on the fingerboard in case you mark or dent the frets. That headstock cover and shape look awesome
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in