Results 1 to 10 of 10

Thread: body mods on an ST1 for a noob

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member ScoopD's Avatar
    Join Date
    Oct 2014
    Location
    Melbourne
    Posts
    52
    Thanks DB. I'm thinking that a file/rasp as a start to remove the bulk and then much sandage. Any thoughts on that? Sanding alone would take far too long I would think - I don't have a belt sander, but even with an orbital and large grit I would be there for ages.

  2. #2
    Banned bargeloobs's Avatar
    Join Date
    Mar 2014
    Posts
    1,700
    Quote Originally Posted by ScoopD View Post
    Thanks DB. I'm thinking that a file/rasp as a start to remove the bulk and then much sandage. Any thoughts on that? Sanding alone would take far too long I would think - I don't have a belt sander, but even with an orbital and large grit I would be there for ages.
    Yep definitely take unwanted meat off with the rasp.
    An invaluable bit of kit in my arsenal is a rolled up 80 grit shearing disc emery, absolutely perfect for the job. You can get em' at any rural store (about $7), better yet if you know a shearer they'll have em' strewn all over their shed floor.
    I even used it to round off the horns and everything because you can get plenty of meat off without fear of gouging out too much unlike the rasp.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	grindi1.jpg 
Views:	183 
Size:	9.5 KB 
ID:	156   Click image for larger version. 

Name:	80 grit cutter emery.jpg 
Views:	172 
Size:	23.0 KB 
ID:	157   Click image for larger version. 

Name:	13.jpg 
Views:	203 
Size:	35.3 KB 
ID:	158  

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •