Page 10 of 11 FirstFirst ... 8 9 10 11 LastLast
Results 91 to 100 of 102

Thread: Ash Les Paul <> ALP - 1 (?)

  1. #91
    Member rockmof's Avatar
    Join Date
    Jul 2014
    Location
    Gold Coast
    Posts
    169

    Some messy wiring

    Well Nick, here it is.

    First pic <> blue switch is the on<>on<>on, which controls the "3 sound". Series (down) Parallel (up) Single Coil (middle={inside coil, bottom pup})
    Middle pic <> red switch (on 0ff on), my tone control, up is a .022uf cap. down a .047 cap, middle no cap.
    Last pic <> what a mess, red switch (on on) is my "black ice, the twisted, soldered wires come from the capacitor to earth, don't really like it too much, but it's different for sure. (not too bad with volume and a bit of drive though).

    For me to hear the variance in tone I need to turn my tone control way down (like "0"), but I rarely use tone anyway. Just a bit of grunt.

    Rick.

    Ps hope the pics' come out in that order.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20141106_165813.jpg 
Views:	145 
Size:	46.7 KB 
ID:	76   Click image for larger version. 

Name:	20141106_165735.jpg 
Views:	109 
Size:	73.5 KB 
ID:	75   Click image for larger version. 

Name:	20141106_165628.jpg 
Views:	144 
Size:	70.0 KB 
ID:	74  

  2. #92
    Banned bargeloobs's Avatar
    Join Date
    Mar 2014
    Posts
    1,700
    Holy Santa Claus Shit!! That makes me dizzy just lookin' at it, 10/10 for that wiring job bro.

  3. #93
    Mentor Nickosaurus's Avatar
    Join Date
    Mar 2014
    Location
    Adelaide
    Posts
    1,077
    Not that bad mate. Nice work fitting it in the bloody cavity. That's always the hardest part.

  4. #94
    GAStronomist wokkaboy's Avatar
    Join Date
    Dec 2012
    Location
    Perth WA
    Posts
    13,555
    glad it was you doing the soldering Rick, I would have given up way before getting it working !
    Well done to fit that much in the cavity.
    How's the noise when idle with no copper shielding ?
    Current Builds and status
    scratch end grain pine tele - first clear coat on !
    JBA-4 - assembled - final tweaks
    Telemonster double scale tele - finish tobacco burst on body and sand neck

    Completed builds
    scratch oak.rose gum Jazzmaster - assembled needs setup
    MK-2 Mosrite - assembled - play in
    Ash tele with Baritone neck - neck pup wiring tweaks and play in

  5. #95
    Member rockmof's Avatar
    Join Date
    Jul 2014
    Location
    Gold Coast
    Posts
    169
    Ha! Guys, I would have liked to make it neat, didn't want to cut the pup wires (just in case) then to get the soldering iron in the leads needed to be long so they could be "moved", but it was a little difficult. I used some heat shrink to cover some of the earth wires and where I joined the hot.

    Well Wokka, no noise, that is since I have "cleaned" it up (so to speak), it wasn't very noisy even before. When I touched the tone switch in the bypass posse it gave a little static but nothing to wright home about.

    May be I'll never undo the four screws again, hopefully.

  6. #96
    Mentor Nickosaurus's Avatar
    Join Date
    Mar 2014
    Location
    Adelaide
    Posts
    1,077
    Until the mod bug bites again

    Don't be scared of cutting wires shorter - you can always splice them longer easily and neatly. Heat shrink is a wonderful thing

  7. #97
    Member rockmof's Avatar
    Join Date
    Jul 2014
    Location
    Gold Coast
    Posts
    169
    Hey bargeloobs
    Just saw your "note"]


    "You see, most blokes, you know, will be playing at ten...
    You're on ten here, all the way up, all the way up, all the way up,
    you're on ten on your guitar...
    Where can you go from there?.... Where?"



    Indeed what is after 10<><><><><><><> oh my Fender Blues junior goes to 12 on both master and volume.

    Spinal Tap, eat your heart out.

    Rick.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20141106_205936.jpg 
Views:	113 
Size:	33.9 KB 
ID:	81   Click image for larger version. 

Name:	20141106_210026.jpg 
Views:	145 
Size:	38.7 KB 
ID:	82  
    Last edited by rockmof; 06-11-2014 at 06:06 PM.

  8. #98
    Banned bargeloobs's Avatar
    Join Date
    Mar 2014
    Posts
    1,700
    Quote Originally Posted by rockmof View Post
    Hey bargeloobs
    Just saw your "note"]


    "You see, most blokes, you know, will be playing at ten...
    You're on ten here, all the way up, all the way up, all the way up,
    you're on ten on your guitar...
    Where can you go from there?.... Where?"



    Indeed what is after 10<><><><><><><> oh my Fender Blues junior goes to 12 on both master and volume.

    Spinal Tap, eat your heart out.

    Rick.
    12's the new 10...Hehehe eat your hearts out indeed:-) nice one man!!

  9. #99
    Member rockmof's Avatar
    Join Date
    Jul 2014
    Location
    Gold Coast
    Posts
    169
    Well, finally finished it. AaaGgg, I don't like the "Black Ice" so that switch will become an on / off for the middle pup, one day.

    Here is a few pics'.
    Wont be building another for a while so might do some modifications on another guitar that, I feel needs some work.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20141110_142047.jpg 
Views:	140 
Size:	71.9 KB 
ID:	180   Click image for larger version. 

Name:	20141110_142100.jpg 
Views:	123 
Size:	74.4 KB 
ID:	181   Click image for larger version. 

Name:	20141110_142234.jpg 
Views:	130 
Size:	59.3 KB 
ID:	182  

  10. #100
    Member rockmof's Avatar
    Join Date
    Jul 2014
    Location
    Gold Coast
    Posts
    169

    More photos.

    Here is a few more photos of ASH.
    Will put some more in gotm in a little while.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20141110_142259.jpg 
Views:	140 
Size:	57.0 KB 
ID:	186   Click image for larger version. 

Name:	20141110_142316.jpg 
Views:	115 
Size:	58.9 KB 
ID:	187   Click image for larger version. 

Name:	20141110_142425.jpg 
Views:	136 
Size:	55.3 KB 
ID:	188  

Page 10 of 11 FirstFirst ... 8 9 10 11 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •