This guitar could only be better if it was a hardtail! Good job Andrew
This guitar could only be better if it was a hardtail! Good job Andrew
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
Looking great Andrew. This axe is a beast. Gonna look super slick with the hardware installed!
Cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
nice job Andrew, your builds continue to improve
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Thanks gents. Agreed on the hard tail point but I don't have a fr axe or a 7 string so here goes. I'm expecting a hard tail 27" quilted maple topped 7 soon as well. That thing will be tuned down to E, so e,b,e,a,d,g,b.
Thought I'd share this as well. Just an a4 sheet of acetate paper, print your design for a logo mirrored on the sheet, cut it out being careful not to touch the ink as it won't dry on plastic. Place it on to bare wood, no paint or clears or it won't work. Tape it in place and use a credit card to run the ink of the sheet onto the guitar.
Wow! that looks awesome!
'As long as there's, you know, sex and drugs, I can do without the rock and roll.'
nice job on the ink logo Andrew
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Clears going on.
Did you design that man? Really sweet.
looks great after a clear coat. Is this 2 pack from the spray gun Andrew ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Posting Permissions
Reply With Quote
