Thanks guysbbvery excited with this build. I've always wanted a 7 string since forever but never 'needed' one with the band's I was in. First guitar with a Floyd as well.
Thanks guysbbvery excited with this build. I've always wanted a 7 string since forever but never 'needed' one with the band's I was in. First guitar with a Floyd as well.
look forward to seeing how this turns out Andrew, sure it will be a beast of an axe
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
so whats next Andrew u almost ready for clear coats ?
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I wish mate. She is ready for a good clearing but I won't get a chance to even touch it till next Wednesday. Damn work. Need to do the burst first also. Then push pull pot to tap the dimarzio blaze custom 7s, upgraded Jack, custom truss rod cover and I'd say she'd he done.
yeah ok, know the feeling well when work gets in the way of a build. At least the paint should be fully cured for clear coats by then. Sounds like this beast will be screaming when its done
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Yeah and I've still got the tl and st to oil up. Question for you mate, the pbg kits you build, do you sell them? Reason I ask, I've shown a few people up here the guitars I've done and I keep on getting asked how much to make them something like that. Might be a good little side earner for the entry to mid level guys.
If you don't want to put it out there on the interwebs my email is Andrew.s.walker1984@gmail.com.
Super quick update. Burst done, going to clean up the neck and do a wax paper transfer on the back of the neck then it's time to clear this sucker.
Super quick update. Burst done, going to clean up the neck and do a wax paper transfer on the back of the neck then it's time to clear this sucker.
Posting Permissions
Reply With Quote
