Good job. Looking great.
Good job. Looking great.
Current:
GTH-1
Completed:
AST-1FB
First Act ME276 (resurrected curb-side find)
ES-5V
Scratchie lapsteel
Custom ST-1 12 String
JBA-4
TL-1TB
Scratch Lapsteel
Meinl DIY Cajon
Cigar Box lap steel
Wishing:
Baritone
Open D/Standard Double 6 twin neck
looks awesome Bec, I'd say you're ready for clear coats !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Okay, I'm going to try not to mess with it any more, calling it done. Clear coat time!
so whats the clear coat plan Bec, you using a wudtone top coat ?
Don't forget to steel wool or scrape the thin white binding edge you see from the top
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
I haven't fogotten - got my steel wool waiting
Yep, going with wudtone satin.
no worries Bec all good. Should come up a treat with 4 or 5 satin coats
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Looks amazing Bec! Gonna be sweet with some clear on there.
cheers,
Gav.
--
Build #01: BC-1
Build #02: ST-1
Build #03: JR-1DC
Build #04: ES-2V
Build #05: ESB-4 (GOTM July 2014)
Build #06: RC-1
Build #07: MK-2
Build #08: TLA-1
Build #09: JR-1DC
Build #0A: LPA-1
Build #0B: STA-1 (GOTM April 2015)
Build #0C: MKA-2
Build #0D: LP-1M
Build #0E: JB-1
Build #0F: FS-1
Find me:
https://www.facebook.com/firescreek.guitars/
http://www.guitarkitbuilder.blogspot.com.au/
Lovin' that vibrant green in contrast with the dark burst. looks slick!
That is a fantastic green you've achieved there, and the burst is very tasteful too.
This will come up a treat I reckon.
"Sometimes you want to give up the guitar, you'll hate the guitar. But if you stick with it, you're gonna be rewarded"
- Jimi Hendrix
My Builds:
#1: Non-PBG SG - "Purple Flame" (Getting Wired)
#2: PBG MB-1 - "The Wasp" (Getting Wired)
#3: PBG IB-1 - "V-Bay at Noon" (90% Done)
#4: PBG SG-1F - (Getting Cleared)
My Future Builds:
PBG ES-1G Custom - "Dave Grohl DG-335 Tribute"
Find me on Facebook!
https://www.facebook.com/brodie.west.9
Thanks
Hey, do you guys clear coat the cavities as well?
Posting Permissions
Reply With Quote
