Last time I looked (going from memory here) I could get the head for $900? and the extra cab for $500ish.
But since then the Ausie dollar has fallen a bit.....
ok so say about $1500 AUS maybe, or about 40 bottles of American honey, that may sway your decision !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
fair enough DB, sounds like its a beast of an amp !
Current Builds and status
scratch end grain pine tele - first clear coat on !
JBA-4 - assembled - final tweaks
Telemonster double scale tele - finish tobacco burst on body and sand neck
Completed builds
scratch oak.rose gum Jazzmaster - assembled needs setup
MK-2 Mosrite - assembled - play in
Ash tele with Baritone neck - neck pup wiring tweaks and play in
Just a heads up on bass amp power. Because it requires a lot more energy to move the air of a bass signal the general thought is that you need about ten times the power (20dB) of whatever the guitarist has to be perceived as being the same volume. So... if your guitarist has 50 Watts the bassist needs about 500 Watts.
Now to the low power amp on stage. Sometimes I play lead with my homemade 8 Watt tube amp and it easily keeps up with the other guitarists Vox AC15. So... go for it Ads, those little Voxs really rock.