PBG-2F build. First guitar kit - here we go

[Trevor Davies]

The guitar looks great! Lovely colour combo with the gold hardware.

Sounds like the guitar building bug has struck again. I hope the "rearranged room" will be big enough to house the "couple" of guitars. The 3d printed warlock has me intrigued! I have been collecting some bits to make a walnut BC Rich "B" - one in a long cue of planned builds. So yes, like fishing rods - just harder to hide.

As for the necks, I have been finishing recent builds with satin polyurethane. I feel this is slicker than gloss.

[normrepa]

Thanks very much gentlemen - I need to turn the heat up on that frog slowly...otherwise the answer would just be 'no' ;-). I have parts for a tele arriving incrementally over the next month and I now have to start wiring and assembling the Warlock. But really I should be putting some time into learning given I dont want these to just be decorative instruments.

Here's a teaser of the BC Rich Warlock inspired body. Body is all glued and I've fitted the floyd rose. still have to size all the holes for pickup mounts etc and then fine tune how things fit together. This is just a raw translucent PLA filament. It'll be an experiment to see how well it holds tune...the 3mm steel bar running under the pickups should help with rigidity though!