Results 1 to 10 of 28

Thread: My Build Diary

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Moderator Trevor Davies's Avatar
    Join Date
    May 2020
    Location
    Perth
    Posts
    1,893
    Quote Originally Posted by OEG69 View Post
    Hi Trevor,

    Haven't considered any stain for the neck. Was planning on just the Tru oil finish. The reason I taped off the heel was hat I didn't want anything to interfere with the fit, as it was very snug out of the box, I thought that coats of oil or such would add layers thus potentially messing with the fit, and if it had to be sanded back, I would mess the fit up even more. Suggestions? Very open and keen to learn from people that have done this before.
    I would add some tru-oil to the neck heel, especially the parts that are visible when the neck is on. Otherwise, it may be difficult matching the colour.
    PitBull Builds: FVB-4, LP-1SS, FBM-1, AG-2, TB-4, SSCM-1, TLA-1,TL-1TB, STA-1HT, DSCM-1 Truckster, ST-1, STA-1, MBM-1, MBM custom, GHR-1 (Resonator), FH-5V (Acoustic), DMS-1 (Mustang).

    Scratch Builds: Pine Explorer, Axe Bass, Mr Scary, Scratchy Tele's.

    The little voices in my head keep telling me "build more guitars"

  2. #2
    Member
    Join Date
    Oct 2025
    Location
    Bunbury WA
    Posts
    18
    Hi Trevor, Wanted to say thank you for the advice, it got me to thinking and you're very correct, there were parts of the heel that are visible once seated. Appreciate the advice, you saved me from making a mistake that wouldn't have ben noticed until much later on, and would have been harder to fix. Thank you.

    Regards

    Owen - OEG69

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •