Thanks fender, yes the back and sides are basswood the front laminate looks like a very fine grained oregon which it probably is not. It’s pretty good except in a couple of places where in the cutting out the edges have splintered a bit, a sharper cnc bit might help, but I think I have successfully filled these.
The sides have little parts where the wood is stressed by curving it to the body shape - small “hairy bits” sticking up which sanding doesn’t remove - hopefully after some top coats of poly the will get rigid enough to break off and will allow sanding to work. Lots of poly coats.
It’s all part of the fun
Cheers
graham