Results 1 to 6 of 6

Thread: Tonerider Humbuckers - series/parallel or coil split.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #5
    Moderator Trevor Davies's Avatar
    Join Date
    May 2020
    Location
    Perth
    Posts
    1,742
    I like the idea that you have a bass that has every possible tone option! And that you were brave enough to give it a go. Finding out what tones you like is important. It must also help you decide what you want in future builds.

    I normally only do the standard type of wiring, since I like the KISS principle. The less controls the better for me. My scratch pine explorer from 1992 only has a bridge humbucker with a vol and tone. I thought I was being adventurous with the "3-way import with high cut" on the tele bass! Having the Varitone (and coil tapping) circuits will make this guitar my tester. I'm sure that they will be dialed in to 1 setting, or not used!! But it will be a learning experience!
    Last edited by Trevor Davies; 12-07-2024 at 05:05 PM.
    PitBull Builds: FVB-4, LP-1SS, FBM-1, AG-2, TB-4, SSCM-1, TLA-1,TL-1TB, STA-1HT, DSCM-1 Truckster, ST-1, STA-1, MBM-1, MBM custom, GHR-1 (Resonator), FH-5V (Acoustic).

    Scratch Builds: Pine Explorer, Axe Bass, Mr Scary, Scratchy Tele's.

    The little voices in my head keep telling me "build more guitars"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •