Quote Originally Posted by fender3x View Post
...

I can use the drill, or just hand polish on the tighter spaces. I have not liked using it in the past. I have experimented a little, and actually burned off some finish around a cutaway. I think I tend to have two problems. One is having the body in one hand and the drill in the other...and then regulating speed and angle of the drill.

That takes me back to the drill press. On it's slowest setting, mine turns at 620 RPM, which is actually a little slower than the Stew Mac polisher. With a small foam polisher I might be able to use it for the inside the cutaways and sides. What do you think?
I have been thinking about the idea of using the drill press with a foam polisher - and cannot really come up with any negatives. At least you are only holding the guitar body, and the drill press will have a constant slow speed.

Thinking back to the first post, we should try to take advantage of the equipment we have! Definitely give it a go, but take it easy. I might try it as well!