Project #5, AG #2

[XP Rider]

XP Rider: You might find files an rasps a good intermediate between sand paper and a dremel for sneaking up to where you need to get things with a bit more control.

Thanks, Rabbit and Trevor. Sanding worked alright on the straight areas, but this lip is only about 2 or 3 mm deep, and in the sharply rounded curve at the bottom the sandpaper didn't cut much. The guitar gods must have been smiling down, as I got away with the use of the Dremel. I do appreciate the suggestion on shaving the plastic cover plate. Pocket knife probably a no go.

[Trevor Davies]

... I do appreciate the suggestion on shaving the plastic cover plate. Pocket knife probably a no go.

I would not use a pocket knife, but if you have those skills if could work.