Ok so the glueing seems to have been good. But have several questions for what I have to do next (questions at the end of the post)



Now starting to shift into the painting of it.
The plan is as follows:
1. Fill the small gap in the neck with wood putty I guess timber would do the trick?).


2. Do the grain fill with epoxy.
3. Sand
4. Spray the SCA acrylic primer/sealer (3 layers)
5. Sand.
6. Spray the white SCA acrylic colour (3 layers).
7. Add the waterslide decals.
8. Spray the acrylic clear coats.
9. Wet sand and polish.

Questions:
A. Drilling holes. Should I do it now or after finishing? So say the humbucker/tuners/resize pot holes now or when I’m done painting ?
B. Is it worth doing step 1? Might be that the epoxy and multiple layers of paint might cover it but not sure.
C. The clear coats, have seen a couple videos where they advise to use 2k clear as it dries faster and harder (live in Brisbane and it’s about to get warm and humid). But still makes me wonder if it’s worth it or not.

Any other advise is well received.


Sent from my iPhone using Tapatalk