Quote Originally Posted by Pendragon View Post
Ok, bad news first still have the same issue bridge height, didn't take into account post height prior to fitting so I have a 9mm height at the base of the neck. Solution, have the original neck from the kit so I'm going to cut the heal end off and use it as a shim, funds have dried up for this build so I'm using what's on hand to fix this.
Sounds like you may need to revisit Simon B's post #33.
https://www.buildyourownguitar.com.a...l=1#post226163

I would think that cutting a shim from the original neck will be quite difficult! I would use hard plastic like Simon suggested.