Finally got the sanding sealer spray today. The ones made in india. These are Nitrocellulose sanding spray. Was skeptical at first when the bottle said wood polish. Then called them up and they asked me to look at the bottom of spray bottle to see what is written.
Sprayed 3 coats of SS on scrap wood stained. Lucky that it doesn't pull out the stain. Will leave it to dry overnight and sand it with 320 and spray coats of 1k clear tomorrow to see if it is compatible. If everything is OK, I shall go ahead to spray the guitar body with sanding sealer and the start staining the top.
Sent from my NE2211 using Tapatalk
Reply With Quote
