TL-1TB Build

[Simon Barden]

Have you checked the scale length properly yet? It's a 22-fret neck (from counting the ridges under the masking tape) but then I noticed it's got a fretboard overhang to add the extra fret on, which indicates that it may well not be a 'conversion' neck.

There are a couple of areas on the top with very obvious dips in. I'd suggest filling those, sanding it flat, and then spraying over those areas again.

[Pendragon]

Have you checked the scale length properly yet?

There are a couple of areas on the top with very obvious dips in. I'd suggest filling those, sanding it flat, and then spraying over those areas again.

By the looks of it its sitting at 27.5 inch from nut to middle of bridge position, so it looks like I'll have to fill and re drill the posts . As for the spots the top part I can fix while re finishing the body for the post holes.