Thats a good idea. I had wondered about it myself and how it could be done. It would certainly be a different type of kit - with different challenges and skills to learn. There could be a number of ways to do one. e.g. many folks just cut down an old guitar-body to use as an insert - which deals with routing - but the challenge is then having a template to mark and cut through the top in the correct place (I marked and cut through the top - then routed out the insert I made through the holes). One of the things about having done this is that I learned a bit more about how guitars "work" in terms of assembly - and I think I would possibly now like to try and make my own body for a build