So I unscrewed the neck, sanded a bit the lower back part that touches the body and mounted all again, after a few days it got better, the neck settled a bit more and now there is a small buzz only in the first and second fret in low A and D strings but you can't hear it when you plug it to the amp - here some pics:
Truss-rod is still untight almost to the limit, if I push the first and last fret to check the neck relief the low E string touches the frets until the 6/7th fret after there is less than a mm of room, I think I'll leave it like that by now, looks like it works and it's playable, I am afraid of doing some damage.
I also rised the pickup a bit with some small cardboard shims in the right side (high strings side) because the volume was too low.
Reply With Quote