Quote Originally Posted by fender3x View Post
TI wonder if MoSch has the same bridge as yours, Rabbit? After seeing you post, I looked at a pic of the kit and the bridge there looks different...more like a fender bridge. It also does not look like the miserable three point bridge that came with my ESB-4 kit or with the T-bird kits...which is good. MoSch did you use a different bridge than the kit?

In any case, if the bridge is too high, you should be able to correct with a shim. I make mine with pieces of veneer, but you can also buy them or make them out of other stuff.
Yes he does. The high action the standard bridge gives isn't an issue with the Babicz, the level of adjustment is awesome. It's well connected to the body where as the standard kinda floats.

My bridge hole mis allignmnet I was able to correct with a file, but it looks like MoSch may have to go with the dowl and re-drill approach. Just be aware that the dowl requires several applications of sealer to make less obvious due to the end grain. If staining the end grain also tends to stain darker. You could go with a contrasting colured timber for the dowel and make it a feature.