First Build TL-1

[MackTown]

What type of paint is your daughter going to use, the acrylic paint your going to use is it Acrylic lacquer or water-based Acrylic artist paint they are not the same and they are not really compatible, the reducer in lacquer is pretty serious stuff I don't fancy your chances going over it with lacquer you will have issues of the water-based paint will only sit on top of your colour and not bite in which means you will get either the reducer in the lacquer lift it or react with the water paints, or both, lacquer is good stuff but in someways not very forgiving, I would suggest you try it 1st before you mess up your hard work or look into airbrush paint set may be better but their not cheap, i would go 1st a couple of coats of binder then prime then top colour then your artwork, I think i know what your trying to achieve may be a 2k clear may not react as bad as lacquer would and can be sourced easy enough in a rattle can but would need to let the lacquer dry for a week before you put a 2k over it or it will simply peel off in a sheet

Thanks for the response phrozin.

For the base coat I am going to use SCA rattle cans, Primer filler and then a white coat.

I haven't purchased anything to for the artwork side of things, but was looking at a paint pen style like this
Will I be able to scuff the surface with 240 or something like that to help the paint grip?
Final coat I was just looking at SCA rattle can clear version of the ones in the photo to provide a glossier finish and protection to the art.

[MackTown]

Headstock is shaped.

Plan is tru-oil finish for the headstock and neck. Are there any guides on here for the preparation work and applying (other than "apply it with a t-shirt" which is all I can find on youtube)?

Also what kind of treatment do I need to do to the fret board?