DTL-1SB First build

[DeanCraig]

Hi all

I have wired up the electrics today on the thinline tele following the diagram below.


On testing the PUPs with a screw driver I can hear:

• Neck Position: Noise from both bridge and neck PUP
• Middle Position: Noise from both bridge and neck PUP
• Bridge Position: Noise from both bridge and neck PUP

So back to an earlier question - there is a jumper wire on my kit 3 way switch below - is this cause of the problem and if so can I just remove? Or is it somethig else?

Thanks