TL adventures

[McCreed]

Oh, looks like we posted at the same time. Sorry McCreed!

Too easy! I almost mentioned checking that the heel was seated all the way, but didn't.

Glad it's sorted. Now get back to sanding!

[JohnH]

Your pic shows a nut to centre-of-saddle distance of roughly 648.5mm. As the design scale length is 25.5” or 647.7mm, you are a lot closer than you think to being spot-on. It’s the nut to 12th fret distance that appears to be 1mm too short for the design scale length and is throwing your measurements out.

Can you take a photo of that measurement to double check?

Here is a pic at the 12th fret...

Too easy! I almost mentioned checking that the heel was seated all the way, but didn't.

Glad it's sorted. Now get back to sanding!

Honestly, this is the problem with working on projects over such long periods. I could have sworn I'd already done it - I was so sure that I didn't even think to check!