PSH-1 Build

[vivek_rc]

Thanks Simon, I’m going to get a lower profile bridge the start with, found this, which I think is the one mrpearson was talking about, will also start on a shim, based on your instructions…

[mrpearson]

Thanks Simon, I’m going to get a lower profile bridge the start with, found this, which I think is the one mrpearson was talking about, will also start on a shim, based on your instructions…

Hi - looks the same as mine and also another builder (bakers dozen ) used this on the same build a few years ago.

To be sure here is the link.

Musiclily Pro 52.5mm Pigtail... https://www.amazon.com.au/dp/B0757K4...p_mob_ap_share


Sent from my iPhone using Tapatalk

[vivek_rc]

Hi - looks the same as mine and also another builder (bakers dozen ) used this on the same build a few years ago.

To be sure here is the link.

Musiclily Pro 52.5mm Pigtail... https://www.amazon.com.au/dp/B0757K4...p_mob_ap_share


Sent from my iPhone using Tapatalk

Thanks mate, placed the order and should be here by Friday, in the meantime will attempt the shim.


Sent from my iPhone using Tapatalk