Quote Originally Posted by Trevor Davies View Post
Hi Blocka,
the
Black is the hot wire,
Green (and bare (Shielding) wire) are the grounds.

also (the red and white (pre-soldered) join the coils - but do not need to be added to the circuit - they just need to be insulated (taped) so that they do not make contact with anything in the control cavity).

It is typical that the actual pup wire colours do not match the colours in the wiring diagrams. A bit annoying.
Thanks for all your help appreciate it
So the hot and grounds is there a specific spot for each of them to attach to the volume/switch?


Sent from my iPhone using Tapatalk