Looks good.

Unfortunately you'll need to do a small bit of modifying and refinishing if you want to replace the stock kit pickups as the four fixing screw 'bumps' are slightly displaced compared to the original (and other replacement) pickups. Nothing a few seconds work with a drum sander on a Dremel won't do, but obviously it needs care to just remove the right amount from the pickguard and body.

They are single coils, so you must expect some noise, even with shielding. The noise level will depend on the electrical noise in the area you are playing, so it will vary. If one of the pickups is RWRP with respect to the other, then the 'both pickups fully up' combination should be near-silent.