The DPZ-4 Sinosauropteryx Bass Build

[fender3x]

...The bridge I used on the RC4A was a bit thicker and a lot heavier than the MM style bridge it came with (which went on the PB4 Frankenbass). As the RC4A is a fixed neck I was caught short on shimming it, and had to lower the bridge into the body about 2mm to get the action correct, but it came out nicely. The pics are in the link below, it looks much like this bridge, but not exactly the same.

Wow! That really came out beautifully. No chipping that I can spot around the rout!

[Andyxlh]

Wow! That really came out beautifully. No chipping that I can spot around the rout!

Beginner's luck I'd say!
I did cut the timber with a mallet and chisel before using the router, that seemed to keep it neat too. I wouldn't want to have to do it again.
I don't think the bridge is quite the same, but it is well made and heavy