I've just resized the pickup holes slightly to get the covers through snug, but without being so tight it'll be impossible once I put a support under there. Screw holes drilled.
The neck mount looks to have around 2 days left printing. Printer has been running 24x7 for a week on this job so far, so a couple of days longer is hardly a concern. Once it's done I can get on to the custom bits I still need - the support for behind the pups and an edge mount enclosure for the output jack. It'll be down behind the logo somewhere and blackwired back to the control cavity so it doesn't stand out too much.
The existing glue joins vary between awesome and woeful. I've attempted to file and sand off a lot of the excess that came from using it to patch the gaps. Some of it I'm hoping will just add to the texture. I have a few gaps left in some of the joins that need a little TLC. I don't really know how effective the primer/filler stuff is yet to know how much it will hide for me.
Reply With Quote