I've been getting frustrated with the fret leveling as the sandpaper I am using seems to go smooth very quick.

And them I'm not sure if I'm taking too much off, etc.

So I decided to move onto something I know and am good at, the wiring and soldering.

I got the wiring diagram from the Pitbill sire for the IB-5 for two humbuckers, two tone pots and two volume pots.

The kit came with two A500K pots, volume, and 2 B500K pots, tone.

1 of the volume pots has a click when you turn it fully counter clockwise. Used that for Bridge Volume.

I have attached photos of the wiring. If someone could take a look and tell me if I'm on the right path.

Orange = output jack earth
White = output jack hot
Black = Bridge earth

The Output jack and picks will be soldered when installing everything on final.

Thanx for your input.

Sent from my SM-A315F using Tapatalk