Hope you can advise me on the Leveling beam I ordered from PitBull guitars with my kits. It's 15 cm long so not as long as the ones in the video's in this thread.
Q1. Is leveling with this short leveling beam effective to get good level frets.
Should a manufacture my own longer one from a aluminum spirit level with 400 grit sandpaper stuck to it with the masking tape and supa glue trick?
Q2. I started with this PBG leveling beam with the 600 grit side. After maybe 2 dozen passes, the sand paper was smooth and no longer removing any material.
I then moved to the 1000grit side and the occurred.
Is this normal for this product?
Should I have used a lubricant like oil on the beam?
Can I "refresh" the sandpaper on this leveling beam? Maybe using the same masking tape and supa glue trick?
Reply With Quote