Next build - another tele!

[Simon Barden]

Looks good so far, but I would recommend trying to finesse the edges of the inlay so they are a bit smoother. If you are anything like me, if you inlay it as is, it will look good to you for a few minutes, and then you'll notice the slight wiggles and wish you'd taken more time.

Definitely use what you have to practice, but I would suggest doing a few test inlay pieces until you feel you've cracked it, before attempting it on the guitar.

[Groovyman32]

Looks good so far, but I would recommend trying to finesse the edges of the inlay so they are a bit smoother. If you are anything like me, if you inlay it as is, it will look good to you for a few minutes, and then you'll notice the slight wiggles and wish you'd taken more time.

Definitely use what you have to practice, but I would suggest doing a few test inlay pieces until you feel you've cracked it, before attempting it on the guitar.

You’re right, zoomed up on a iPad screen you can clearly see the need for more finessing. I cleaned them up this evening but I can get them better I think.

I also spent some time making a routing base for the Dremel… not quite finished but nearly there - hopefully it’s going to work!


Sent from my iPad using Tapatalk