Mark's JTL-1 TeleMaster / JazzMaster

[McCreed]

Do I re-draw the wiring diagram flipped around and pots moved? Or is it easier to wire up everything with slightly longer wires, follow the diagram as is and then flip after everything is connected? Anyone done something similar? I'm typing at you @McCreed

Uh-oh...

I have the reverse control plate on all my tele, tele-esque guitars. I pretty much just move the two pots and flip the switch around.
I've done the wiring this way from scratch so never thought much about wire length, but on my latest project tele, the stock wires were long enough to just move thing around.

Here's one diagram I've used:
http://www.guitar-mod.com/wiring/tele_rev.gif

EDIT:

...but on my latest project tele, the stock wires were long enough to just move thing around.

I tell a lie... I just realised I completely upgraded all the electronics on that Squier tele.
Sorry, upper-middle-age brain syndrome.