TL-volume when in middle position

[RocknRolf]

Thank you McCreed,

I just plugged in my guitar and checked again and I still have the feeling the positions 1 and 3 are ok. But position 2 is just the bridge pickup, but then on a slightly lower volume.

I will go over the soldering joins and see if it fixes the issue.

Cheers!

[McCreed]

Thank you McCreed,

I just plugged in my guitar and checked again and I still have the feeling the positions 1 and 3 are ok. But position 2 is just the bridge pickup, but then on a slightly lower volume.

I will go over the soldering joins and see if it fixes the issue.

Cheers!

Have you tapped on the pieces with a screwdriver (or other steel implement) while switching between positions?
This can give you a more obvious sound to judge the output by.

If you're only getting the bridge in pos 2 but with lower output, we'll have to look in a different direction to suss the issue, but it could still be a dodgy solder joint or ground problem.

Report back with what you find. Interested!