Results 1 to 10 of 156

Thread: The Frankencaster

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-03-2021, 03:33 AM #11
    phrozin
    phrozin is offline
    Mentor phrozin's Avatar
    Join Date
    Aug 2015
    Location
    Adelaide South Australia
    Posts
    547
    if you're after proper spacing if you're trying to do ferrells straight and true use a NEW 4 flute end mill bit their very sharp and won't wobble while cutting in the drill press you want the drill press speed pretty fast you'll never get them right with a drill bit or even with a Brad point

    https://www.endmill.com.au/4-flute-s...-tialn-hrc-45/
    Last edited by phrozin; 03-03-2021 at 03:36 AM.
    My facebook

    126 guitars done so far still going, 34 Starts, 25 Teles, 27 Les Pauls, 11 SGs, 8 Hollow Body, 21 Super Strats
    Reply With Quote Reply With Quote
  2. Liked by: Cliff Rogers, Eponymous
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules