Nice work there, far more aligned. I may have maligned that type of fixture unfairly, looks like you found a good’un!
Nice work there, far more aligned. I may have maligned that type of fixture unfairly, looks like you found a good’un!
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Hi FW. Your assessment was pretty close to being right. It is a bit of a pain trying to align the drill with each centre punched hole properly. You really have to be completely fastidious about it and it takes time. That said, it is pretty solid metal and doesn’t seem to sag with the drill, so I am putting down the tiny differences to my alignment technique. If I can get it as close on the new body though, I will be happy. There is another one I saw, which is US made and costs over $300aud..., with shipping, it would be cheaper to get a bigger drill press!
I am pretty confident with how I can do it and how it works now. I spent hours trying to work out how to clamp it (my clamps don’t reach far enough to get both sides and clamping one side introduces a slight lean) but, working methodically and carefully aligning it seems to have got the right result.
It’s a great result, and your approach does you great credit to get it to work. Even with a drill press with a deep enough throat, you can still get it wrong shifting the body or the drill in relation to each other.Originally Posted by Eponymous
This has been a bugbear of mine for some time, with guitars and other projects, so I want the o get one of these to mount to my drill press table:
https://www.machineryhouse.com.au/M1...mpound%20table
FrankenLab
Hand crafting guitars, because Death Rays are expensive.
Posting Permissions
Reply With Quote