Looks great Frankie.

The kit supplied bridges are not too good when it comes to setup as the saddle barrels are quite thick in diameter and restrict how low you can go at the bridge end of things.

My EX5 had the same bridge and eventually swapped it out for something with lower and thinner saddles. Only dropped level by a small amount but still much lower action than before.

Preferred action height for low enders can vary from one person to the next. After formerly owning a couple of Ric's I have never played anything with as low an action. Great for playing with a pick but not so forgiving when playing finger style.

Some notable Bass players tend to suggest a little bit of high action is not too bad as it makes you work harder???

With 5 low end stringed things in my house all have differing action heights, mostly due to limitations in bridge designs and have them all set up as low as possible without buzzing, which has still left plenty of height in the middle part of fretboard.

Because the strings are thicker and vibrate more, trying to eliminate buzzing above 12th fret can be quite a challenge.

Good luck with your quest and trust you will have lots of fun along the way. Heck, you may even be tempted into crossing over to the dark side, ha ha!

Cheers Waz

Sent from my SM-A520F using Tapatalk