I did not have to do much work on the neck at all, thankfully.
Simon had mentioned earlier that that the wood may still be settling, drying and whatnot.
Which may cause me some issues in the coming weeks. But (knocks on wood, not the guitar though) I didn't even have to adjust the truss rod. Clean notes up and down the neck, no warping, no buzzing. Intonation was good, as I had mentioned in a previous post.
But another measuring, and checking with a tuner showed equal notes on 12th fret.
All in all I'm very happy with it.

Thanks for the compliments! I think she looks classy.

Here's a question - there's an electronic buzzing that goes away when I touch the tone/volume knobs or the pickup selector switch.
Doesn't buzz / not buzz in relation to my hands on the strings.
I grounded to the bridge, and the pre-wired harness had instructions and locations to ground pickups / pickup selector switch, etc.
Alto, same buzz on my fender, which I've never opened up or anything, and is only about a year old.

Now that I'm typing it out, I remembered I suspected it may have been my cable, or another link in my signal chain. Can an outside-of-the-guitar piece of the chain cause a buzzing issue like that? Am i even making sense right now? Any help would be greatly appreciated. IT's the only issue with an otherwise wonderful guitar.